data/Software/EN102C - Software for the GDS102

GDS102v 1 13 03.zip03.1.2.2018 - 1) During printing in playback mode the date of recording is being printed. (Earlier the current date was printed) 2) Printer bug fix. The text data was never update after printer start 3)Reduced paper advance after stopping printing.
Old software
01 12 09(3) GDS102.102SW-G006-01.12.09(3) GDS102, version 1.12.9 release notes in 1.12.07 1. Priority of the indicated depth has been changed. If the offset is set non-zero, depth below keel will always be indicated regardless of the draft setting. 2. One more text field is added below the depth indication on the screen. This is to provide clear indication which depth value id being indicated: below transducer/below the surface/below the keel. 3. NMEA Alarm changes. If the valid AKN message received – the status in the ALR message is changed to A. (Acknowledged) 4. Screen presentation Alarm changes. The alarm label always keeps red color when in alarm conditions. The alarm label is blinking if alarm is not acknowledged (from the display unit keyboard, externally or from NMEA line) GDS102, version 1.12.09 release notes Feb 2014 1. Detected amplitude is outputted on the ana channel #3 (“Trygve Braarud” feature) 2. Minimal TX pulse width is increased to 300us 3. Number of averaged digitized samples is reduced from 10 to 5 4. Blanking period is increased to 60cm (High F) and 80cm (Low F) 5. Default GAIN settings changed to 55% (High F) and 41% (Low F) 6. Default TVG settings changed to 65% (High F) and 60% (Low F) GDS102, version 1.12.09 release 2 notes April 2014 Fix of bug of crash of output com 2 when rebooted with heavy load on com 2 input GDS102, version 1.12.09 release 3 notes May 2014 Bug fix, Change of frequency in software, causes change of pulse length, this did not always follow – fixed Bug fix, Top information line moved down 3 pixels to be compatible with new screens DG81.
GDS102 1 12 6.EXE
1 12 10 (2)GDS102.102Fixed shallow water issues. system detected surface as bottom in some cases • Jumping amplitude diagnosed to mixer issues. Slight frequency differences causing filter to overreact (shown a little extreme when using simulator with slightly different frequency return) –change to be made in PLD 14 • Swapped N and E on GPS line • To check hanging text on NMEA on coms screen when changing from output to input
1.13.01 GDS102.102Changes for autorange, and IEC62288:2014 and MSC302 (ALF) See release file for details
1.13.02 GDS102.zipFixed an issue where printing in playback mode printed the current date instead of date of recording.
GDS102 v 1 12 4.EXE
1.13.01 GDS102 changes.docxRelease notes for the software version GDS102 v1.13.01
1 12 7(2) GDS102 1.12.7.EXEGDS102, version 1.12.7 release notes 1. Priority of the indicated depth has been changed. If the offset is set non-zero, depth below keel will always be indicated regardless of the draft setting. 2. One more text field is added below the depth indication on the screen. This is to provide clear indication which depth value id being indicated: below transducer/below the surface/below the keel. 3. NMEA Alarm changes. If the valid AKN message received – the status in the ALR message is changed to A. (Acknowledged) 4. Screen presentation Alarm changes. The alarm label always keeps red color when in alarm conditions. The alarm label is blinking if alarm is not acknowledged (from the display unit keyboard, externally or from NMEA line)