data////Software//DL2 - Software for screen and JB70 Unit

DL2 Customer Release notes.pdfRelease notes, showing the main new features in the latest versions.
Instruction for upgrade.docxSome instruction for use with upgrade of DL1 DL2 and DL21 systems using the SKIPPER service software. It is important that the software version in the screen and the electronic unit match. If you are replacing 1 unit , check you have the same software version, and if not update the older part.
SW for DL2 1.2.0.0 (HF) w manuals NEW UPGRADER IEC62923.zipSoftware SW-M004/5 1.2.0.0 with IEC62923(2018) Size 36MB. This package includes a new more stable upgrader and is recomended.
To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times.
BAM Alerts compliant, alerts changed to be warnings. all can be individually disabled. New manual also avaialble.

- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors),
- Patch 2 for Total & Trip error (double distance error in previous versions)
- Patch 3 fix of loss of STW when passing North heading.
Patch 7 new filter and frequency changing algorithm and variuos bug fixes
Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending.
remove off as screen dimming level,
bug fixes on config saving, Incoming ALF/ACN and gui texts
removal of -0.0 possibility for better use with IR300
improvements in sensor upgrade functionality
Latest version 1.1.2
- div bug fixes
Added Ground total and trip, with low integrity if bottom is lost
No communication fixes (due to multiple clocks or long input messages)
Patch 1 (1.1.2.1)
Parallel screens functions bug fix on older displays/OS
Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04)

Last Update 28.8.2021
Older Versions
DL2 Software version 1.0.13 patch 4 23.08.2016 with manuals.zip
DL2 Software version 1.0.13 patch 4 23.08.2016.zipSoftware version 1.0.13 (Patch 4) for DL21 & DL2,
Fixes to allow the DL21 DL2 part to work in SOG only mode, also improves STW values to be within spec.
Contains SW-M005-1.0.13.4 for CU-M001-xx Display, SW-M004-1.0.13.4 for JB70, SW-M006-2.14 for sensor.
Changes of 1.0.13.2 to 1.0.13.4 stabilise the system with high NMEA input loads.
SW for DL2 1.1.1.8 (HF) w manuals NEW UPGRADER.zip Software version 1.1.1 for DL2 with high frequency - MUST BE USED WITH SERVICE SW V >1.91
- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors),
- Patch 2 for Total & Trip error (double distance error in previous versions)
- Patch 3 fix of loss of STW when passing North heading.
Patch 7 new filter and frequency changing algorithm and variuos bug fixes
latest version 1.1.1.8 03.03.2020
Patch 8 : Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending.
remove off as screen dimming level,
bug fixes on config saving, Incoming ALF/ACN and gui texts
removal of -0.0 possibility for better use with IR300
improvements in sensor upgrade functionality
Package contains: 1) SW M004 for DL2 JB70 Unit, 2) SW M005 Graphic Display CU-M001-xx 3) SW M006 FW for DL2 Sensor with high frequency for sensor SN > 170373
SW for DL2 1.1.1.8 (HF) w manuals OLD UPGRADER.zip Software version 1.1.1 for DL2 with high frequency - MUST BE USED WITH SERVICE SW V <1.90
- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors),
- Patch 2 for Total & Trip error (double distance error in previous versions)
- Patch 3 fix of loss of STW when passing North heading.
Patch 7 new filter and frequency changing algorithm and variuos bug fixes
latest version 1.1.1.8 03.03.2020
Patch 8 : Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending.
remove off as screen dimming level,
bug fixes on config saving, Incoming ALF/ACN and gui texts
removal of -0.0 possibility for better use with IR300
improvements in sensor upgrade functionality
Package contains: 1) SW M004 for DL2 JB70 Unit, 2) SW M005 Graphic Display CU-M001-xx 3) SW M006 FW for DL2 Sensor with high frequency for sensor SN > 170373
SW for DL2 1.1.2.1 (HF) w manuals NEW UPGRADER.zip Software version 1.1.1 for DL2 with high frequency This package includes a new more stable upgrader and is recomended.
To use this software upgrade service software to 1.92 or above, upgrade will normally have to be performed 2 times.
- Changes in dual Display parallel version (requires long press to change and other bug fixes, for communication errors),
- Patch 2 for Total & Trip error (double distance error in previous versions)
- Patch 3 fix of loss of STW when passing North heading.
Patch 7 new filter and frequency changing algorithm and variuos bug fixes
Patch 8 Improved logging function, removal of autozip of files on usb, these should now be manually zipped before sending.
remove off as screen dimming level,
bug fixes on config saving, Incoming ALF/ACN and gui texts
removal of -0.0 possibility for better use with IR300
improvements in sensor upgrade functionality
Latest version 1.1.2
- div bug fixes
Added Ground total and trip, with low integrity if bottom is lost
No communication fixes (due to multiple clocks or long input messages)
Patch 1 (1.1.2.1)
Parallel screens functions bug fix on older displays/OS
Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04)
SW for DL2 1.1.2.1 (HF) w manuals OLD UPGRADER.zip
Latest version 1.1.2 with old upgrader, (to be used with service software <1.92)
Recomend use with new upgrader for better upgrade stability

- div bug fixes
Added Ground total and trip, with low integrity if bottom is lost
No communication fixes (due to multiple clocks or long input messages)
Patch 1 (1.1.2.1)
Parallel screens functions bug fix on older displays/OS
Package contains: 1) SW M004 for JB70 electronic unit, 2) SW M005 Graphic Display CU-M001-xx, Firmware upgrade is currently avalible for sensor (current is 3.04)
Windows Version
DL2 Windows SW M005-1.2.0.0 (BAM version).rar
SW M005 1 1 3 0 for windows.rar
SW M005 WIN ver 1 1 1 7.zip
SW M005 WIN R1.1.2.1.rar
Windows drivers.rarWindows version of display decompress the drivers into a folder on your PC, then copy into that folder the software .exe you require, and start the .exe from within the folder (or via a shortcut)