 LICENSE.lgpl-2.1.pdf | SKIPPER software uses a number of Open source programs, under license type LICENSE.lgpl-2.1. This file explains and clarifies the use of the software under this license. | |
 SW M007-ESN100 remove history.tar |
Patch for ESN100 1.1.0.10 (16.2.2024) Loading this software using the normal method on service software, will clean up the internal disk, stop the system rebooting. This issue will be fixed in the next release 1.2.0.0 due in June 25 To prevent this happening again, turn off history function. Last Update 11-4-2025 | |
| SW M007-Patch-MB-M006-251017.tar | Patch for ESN100(17.11.2025) Loading this software using the normal method on service software. Kernel upgrade - ref. TouchScreen Calibration | |
| SW M007-1.2.0.2 Software for ESN100.tar | SW-M007-1.2.0.2 Bug fix of Loop test on diagnostic screen, and FW reporting from the TRansceiver Restrictions to the Max power added at 50kHz (70%) Known issue - Touch is insensitive on menu button in some cases - try recalibrating the screen on display setup, but we're working on it! 1.2.0 - New version with major changes: Removal of Manual gain, replaced by addition of Sensitivity Addition of SDSTN message to identify Channel allowing both channels to be sent on the same NMEA output Improvements in the transceiver and signal noise ratio Required colour change for Invalid data. New Approval:(MED B and MED D) including: IEC62288 Ed.3:2021 Changes made for ISO9875:2023, approval not yet formalised New Manual Version 1.2.0 Other Changes: Bug fix: Fix of Alert Power reduction message Bug fix: Adjusted Multicast TTL to 64 Bug fix: fixed ACN message Bug fix: Improved factory reset Bug fix: Improved synch of Communications screen with 2 displays Bug fix: other minor bugs fixed NOTE: If the system is continually rebooting, run the Update SW_M007-ESN100_remove_history.tar before upgrading to this version. Last Updated 26.03.2026 | |
 Equivilent Software for Windows | ||
| ESN100 latest windows software with Drivers.zip | This version (1.2.X) required some extra drivers. Copy this directory locally (do not place exe in old folder), the latest SW version is included.
The windows versions of the Multi software (Not web version) can be started using a script as follows Start the software manually, set the LAN settings Then use a script to start the window: Remove the windows border : -frameless-window , the program can be killed using alt+F4 Use the saved LAN settings : -load-net-interface Maximise the window : -maximize-window to save the current LAN settings: -save-net-interface Example to start automatically start multi_screen.exe -load-net-interface -maximize-window -frameless-window to start to select new LAN settings Start multi_screen.exe -save-net-interface -maximize-window -frameless-window | |
| Older versions | ||
| ESN100 PC Version SW M007-1.0.4.0.zip | The windows versions of the Multi software (Not web version) requires the ESN Drivers to be copied locally, and then this file can be copied into that directory Select the same software version as you are running on the display | |
| ESN100 PC Version SW M007-1.1.0.9.exe | Software only, to be placed in the driver folder preferably in c:\skipper\ESN100\. If you do not have this folder use the other .zip file with drivers included | |
| ESN100 PC Version SW M007-1.1.0.9.zip | Software only, to be placed in the driver folder preferably in c:\skipper\ESN100\. If you do not have this folder use the other .zip file with drivers included | |
| ESN100 PC Version SW M007-1.2.0.0.zip | Software and driver (some extra required in 1.2.X) to be placed in a folder preferably in c:\skipper\ESN100\. | |
| ESN100 1 0 3 c.rar | ||
| Older versions | ||
| SW M007 1 0 1 ESN100 software.tar | Recomended Software update for ESN100 This software includes improvements in Auto functions and a number of bug fixes. | |
| SW M007 1 0 3 0 Software for ESN100 Display.tar | Software update for ESN100 1.01.03 - This is a new type of upgrader and the files do not need to be unzipped. Use the latest skipper service software and go to ESN100 tab for further instructions. | |
| SW M007 1 0 4 0 Software for ESN100 Display.tar | Software update for ESN100 1.01.04 -
This is a new type of upgrader and the files do not need to be unzipped. Use the latest skipper service software and go to ESN100 tab for further instructions. 1.0.4.0 changes History to 24h (previously 12h), adds printer menu, and option to turn on and off the LAN printer (runs with service software or ESN print and archive software that can be downloaded from the website), and gives option to download the previous 2 days history. New manual also available New service software 1.88 , will also download a stand alone .exe in the skipper/service software folder, ESN print and archive software V1.0.1 that can run in stand alone mode | |
| SW M007 1 1 0 10 ESN100.tar |
ESN100 1.1.0.10 (16.2.2024) ALC alert format is corrected to remove extra ,,, at the end of the format. ESN100 1.1.0.9 (26.05.2023) Correction of Local or UTC clock, if the offset in ZDA is -00 Added a variable number (8) in message PSKPDPT for the number of sequential fully qualified pings (0-9) this can be used as quality of the signal ESN100 1.1.0.8 (14.11.2022) correct error in UDP (sending too many messages on different groups) Added a fixed number (8) in message PSKPDPT for signal strength ESN100 1.1.0.7 (3.11.2022) fix of clock input adjust ment of max ping to prevent power baterry emptying Remove noise from screen introduced in 1.1.0.5 ESN100 1.1.0.6 (3.10.2022) bug fix of noise on screen improvement of deep water power output in 200kHz ESN100 1.1.0.6 (30.09.2022) Added HBT on second Alarm UDP group bug fix of beeper beeping unevenly, particularly when range changes. ESN100 1.1.0.5 (23.09.2022) Improvement of logging function - longer logging period of raw data Memory/CPU over useage corrected Noise test summary on diagnostic page is corrected UDP s: d: order is now not important UTC/LOC time is corrected ESN100 1.1.0.4 bugfix Transducer 2 shows Transducer 1 information (from 1.1.0.1) Problem with receiveing ZDA clock (from 1.1.0.1) ESN100 1.1.0.2 bugfix Removed occasional popup for 2 transducers ESN100 1.1.0.1 bugfix speed of sound function changes addition of EPV standby and remote control Recomended Software update for ESN100 1.1.0 Includes the new Alert standard IEC62923 BAM standard with alerts. A new Manual and Type certificate is also available. Previously 1.1.0.0 This is a new type of upgrader and the files do not need to be unzipped. Use the latest skipper service software and go to ESN100 tab for further instructions. 1.0.4.0 changes History to 24h (previously 12h), adds printer menu, and option to turn on and off the LAN printer (runs with service software or ESN print and archive software that can be downloaded from the website), and gives option to download the previous 2 days history. New manual also available New service software 1.88 , will also download a stand alone .exe in the skipper/service software folder, ESN print and archive software V1.0.1 that can run in stand alone mode 1.0.3.0 included improvements in Auto functions and a number of bug fixes Last Update 16-2-2024 | |
| SW M007 1 1 0 8 ESN100.tar |
ESN100 1.1.0.8 (14.11.2022) correct error in UDP (sending too many messages on different groups) Added a fixed number (8) in message PSKPDPT for signal strength ESN100 1.1.0.7 (3.11.2022) fix of clock input adjust ment of max ping to prevent power baterry emptying Remove noise from screen introduced in 1.1.0.5 ESN100 1.1.0.6 (3.10.2022) bug fix of noise on screen improvement of deep water power output in 200kHz ESN100 1.1.0.6 (30.09.2022) Added HBT on second Alarm UDP group bug fix of beeper beeping unevenly, particularly when range changes. ESN100 1.1.0.5 (23.09.2022) Improvement of logging function - longer logging period of raw data Memory/CPU over useage corrected Noise test summary on diagnostic page is corrected UDP s: d: order is now not important UTC/LOC time is corrected ESN100 1.1.0.4 bugfix Transducer 2 shows Transducer 1 information (from 1.1.0.1) Problem with receiveing ZDA clock (from 1.1.0.1) ESN100 1.1.0.2 bugfix Removed occasional popup for 2 transducers ESN100 1.1.0.1 bugfix speed of sound function changes addition of EPV standby and remote control Recomended Software update for ESN100 1.1.0 Includes the new Alert standard IEC62923 BAM standard with alerts. A new Manual and Type certificate is also available. Previously 1.0.4.0 This is a new type of upgrader and the files do not need to be unzipped. Use the latest skipper service software and go to ESN100 tab for further instructions. 1.0.4.0 changes History to 24h (previously 12h), adds printer menu, and option to turn on and off the LAN printer (runs with service software or ESN print and archive software that can be downloaded from the website), and gives option to download the previous 2 days history. New manual also available New service software 1.88 , will also download a stand alone .exe in the skipper/service software folder, ESN print and archive software V1.0.1 that can run in stand alone mode 1.0.3.0 included improvements in Auto functions and a number of bug fixes Last Update 30.9.2022 | |
| SW M007 1 1 0 9 ESN100.tar |
ESN100 1.1.0.9 (26.05.2023) Correction of Local or UTC clock, if the offset in ZDA is -00 Added a variable number (8) in message PSKPDPT for the number of sequential fully qualified pings (0-9) this can be used as quality of the signal ESN100 1.1.0.8 (14.11.2022) correct error in UDP (sending too many messages on different groups) Added a fixed number (8) in message PSKPDPT for signal strength ESN100 1.1.0.7 (3.11.2022) fix of clock input adjust ment of max ping to prevent power baterry emptying Remove noise from screen introduced in 1.1.0.5 ESN100 1.1.0.6 (3.10.2022) bug fix of noise on screen improvement of deep water power output in 200kHz ESN100 1.1.0.6 (30.09.2022) Added HBT on second Alarm UDP group bug fix of beeper beeping unevenly, particularly when range changes. ESN100 1.1.0.5 (23.09.2022) Improvement of logging function - longer logging period of raw data Memory/CPU over useage corrected Noise test summary on diagnostic page is corrected UDP s: d: order is now not important UTC/LOC time is corrected ESN100 1.1.0.4 bugfix Transducer 2 shows Transducer 1 information (from 1.1.0.1) Problem with receiveing ZDA clock (from 1.1.0.1) ESN100 1.1.0.2 bugfix Removed occasional popup for 2 transducers ESN100 1.1.0.1 bugfix speed of sound function changes addition of EPV standby and remote control Recomended Software update for ESN100 1.1.0 Includes the new Alert standard IEC62923 BAM standard with alerts. A new Manual and Type certificate is also available. Previously 1.1.0.0 This is a new type of upgrader and the files do not need to be unzipped. Use the latest skipper service software and go to ESN100 tab for further instructions. 1.0.4.0 changes History to 24h (previously 12h), adds printer menu, and option to turn on and off the LAN printer (runs with service software or ESN print and archive software that can be downloaded from the website), and gives option to download the previous 2 days history. New manual also available New service software 1.88 , will also download a stand alone .exe in the skipper/service software folder, ESN print and archive software V1.0.1 that can run in stand alone mode 1.0.3.0 included improvements in Auto functions and a number of bug fixes Last Update 26.5.2023 |